Abstract
Using Dimethyl 2,5-furandicarboxylate with 1,3-propanediol and 2-methyl-1,3propanediol to synthesize a series of bio-based poly(propylene 2,5-furandicarboxylate (PPF), poly(propylene-co-2-methyl-1,3-propanediol 2,5-furandicarboxylate) (PPMF) and poly(2-methyl-1,3-propylene 2,5-furandicarboxylate) (PMePF), are synthesized by conventional melt polymerization. The thermal, mechanical, and hydrophilic properties of the substituents for PPF are tested by parallax scanning thermal analyzer (DSC), thermogravimetric analyzer (TGA), dynamic mechanical analysis (DMA), and tensile testing. Increasing the content of -1,3-propanediol (MPO) will reduce the Tm and Tg of PPF, with the highest Tm and Tg of PPF, which are 175.9 ℃ and 83.0 ℃, respectively, and the enthalpy of fusion (ΔHm) is 38.6 J g-1.
Keywords摘要
利用2,5?喃二甲酸與1,3-丙二醇及2-甲基-1,3丙二醇合成一系列生物基之聚2,5?喃二甲酸1,3-丙二醇酯(PPF)、聚2,5?喃二甲酸2-甲基-1,3丙二醇1,3-丙二醇共聚酯(PPMF)及聚2,5?喃二甲酸2-甲基-1,3丙二醇酯,通過常規之熔融聚合合成。測試取代基對於PPF的熱性能、機械性能、親水性,通過視差掃描熱分析儀(DSC)、熱重分析儀(TGA)、動態力學分析(DMA)、以及拉伸測試,隨著2-甲基-1,3-丙二醇(MPO)含量增加會降低PPF之Tm及Tg,PPF之Tm及Tg最高,分別為175.9 ℃和83.0℃熔融焓(ΔHm)為38.6 J g-1。
關鍵字Also in this issue
Full TOC →- Study of Blended TPU/ PA 6 Composite Electrospinning Nonwoven for Blocking Aerosol ParticlesI-Chen Yang, Ya-Xuan Chiu, Shuo-Qi Zeng, Yi-Jun Pan
- Celebration & DressPi Jing Ferng, Wen Kuei Lai
- Evaluation and Test of Sulfonation Upgrading Performance of PVA Proton Exchange MembraneWan-Ling Liao, Chih-Hung He, Mei-Feng Lai, Ching-Wen Lou, Jia-Horng Lin
- Flame Retardancy and Properties Evaluation of Polyurethane Foam by Adding AlginatePolyurethane Foam by Adding AlginateKai-Xiang Jiang, Ruei-Ren Ou, Chen-Hung Huang, Ching-Wen Lou, Jia-Horng Lin
- Study about the Absorbing Moisture Evaluation of the Inner Layer in Sweat pantsC. H. Chan, W. H. Hsing