3D Fabric Used in the Shoe-Pads Comfortableness to Assess

Abstract

Most of shoe-pads combine fabric with. In this experiment, we use the shoe-pads which combines 3D Fabric with EVA foaming material compare with the shoe-pads which combines knitted fabric with EVA foaming material that we have seen usually, and estimated which is more comfortable by theirs functions of shock-absorbing, preventing slide and compression. According the experiment, the shoe-pads combine HR430 with 4mm EVA foaming material is better than others, its attrition modulus(0.5) is the highest of 3D fabrics, its change rate is the second low(61%), its value of G in the shock-absorbing test is the lowest(8.7)(Low is better). Comparing with the shoe-pads which combines knitted fabric with EVA foaming material that we have seen usually--- attrition modulus(0.63), change rate(84%), value of G(14.3). Though the preventing slide of the shoe-pads which combines 3D Fabric with EVA foaming material is worse, but others functions are much better than the shoe-pads which combines knitted fabric with EVA foaming material.

• 3D fabric
• Insole

摘要

鞋墊大多為織物貼合EVA發泡材的形式所組成，本實驗主要是用三層網布(HR278TN、HR430、HR249、HR023、HR029)來貼合EVA發泡材與目前市面上常見的針織布貼合EVA發泡材來分析與比較，並以止滑、吸震、壓縮來評估何者舒適性較佳。由實驗結果得HR430貼合4mmEVA發泡材為較適合製成鞋墊，其中摩擦係數0.5，知為三層網布中最高0、形變率61%為在三層網布貼合4mmEVA發泡材中第二、吸震測試中的G值達到最低的8.7相對於針織布貼合EVA發泡材的摩擦係數0.63、形變率84%、G值14.3來說，儘管在止滑性方面三層網布貼合EVA發泡材較差但在其它方面的性能卻是遠遠優於於針織布貼合EVA發泡材。

• 鞋墊
• 三層網布
• 3D織物

• The Study of Making Electroluminescence of Pattern Fabric
  E. T. Chan, W. H. Hsing, P. J. Chen, N. T. Lee
• Synthesis and Interfacial Properties of Gemini Surfactants with Hard Chain and Soft Chain
  H. J. Wu, C. C. Lai
• Bagasse Soilless Culture Medium Prepared by Microwave Foam Method
  W. Lin, C. P. Chang
• Preparation and Thermal Properties of Polyurethane Microcapsules Containing Various Ratio of n-Eicosane and n-Docosane
  H. C. Li, G. S. Huang, C. R. Li, C. P. Chang
• Costume Design of the Application Materials Roses
  Y. T. Liu, M. L. Hsiao