Description Detail

Vol.19, No.2(2012-)(73) 
The Effect of Different Rates of Water-based PU on the Physical Property of the N/T Spunbond Nonwoven
不同濃度的水性PU加工液對N/T紡粘不織布之物性影響研究
Z. H. Lai, W. G. Kuo
賴祖浩, 郭文貴
In this study, used Nylon / PET (70/30) ultra-fine fiber spunbond non-woven fabric for the fabric filament, Impregnated with water-based PU. The pressure absorption, drying, bridges and other steps. By adding different concentrations of water-based PU to investigate the physical properties of fabrics to find the best properties include: stiffness, burst strength and tensile strength and friction. The results showed that when the water-based PU was 20% of the physical properties of the fabric began to have significantly improved. The concentration increased to 40%, the properties have further strengthened.
本實驗係以Nylon/PET(70/30)超細纖維紡粘長纖不織布為基布,施以水性PU浸漬處理,經壓吸、烘乾、架橋等步驟,藉由添加不同濃度的水性PU來探討其加工布之物性研究,找出最佳的物性包括:硬挺度、破裂強力和摩擦以及拉伸強度,結果顯示當水性PU濃度為20%時對織物的物性開始有明顯的改善,而濃度提升到40%時,物性又有更進一步的加強。
Nylon / PET (70/30) ultra-fine fiber, water-based PU, water-based PU padding
Nylon/PET超細纖維、水性PU、水性PU浸
Year Volume
2020 27.1 | 27.2
27.3 |
2019 26.1 |
2018 25.1 |
2017 24.1 | 24.2
24.3 | 24.4
24.5 | 24.6
24.7 | 24.8
24.9 |
2016 23.1 | 23.2
23.3 | 23.4
23.5 | 23.6
23.7 | 23.8
2015 22.1 | 22.2
22.3 | 22.4
22.5 |
2014 21.1 | 21.2
21.3 |
2013 20.1 | 20.2
20.3 | 20.4
2012 19.1 | 19.2
19.3 | 19.4
2011 18.1 | 18.2
2010 17.4